70-743 | Microsoft 70-743 Free Practice Questions 2021

NEW QUESTION 1
HOT SPOT
You have a DirectAccess Server that is accessible by using the name directaccess.fabrikam.com On the DirectAccess server, you install a new server certificate that has a subject name of directaccess.contoso.com, and then you configure DNS records for directaccess.contoso.com
You need to change the endpoint name for DirectAccess to directaccess.contoso.com
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: Set-DaClient-ComputerName directaccess.contoso.com

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN
server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, You modify the Network Policies on Server1. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 3
DRAG DROP
Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows 2012 R2 installed. Server2 has Windows Server 2021 installed.
You perform a live migration of a virtual machine named VM1 from Server1 to Server2. You need to create a production checkpoint for VM1 on Server2.
What three Windows PowerShell cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: We need to update the VM Version to enable the Production Checkpoints feature. Step 1: Stop-VM
The virtual machine should be shut down before upgrading it. Step 2. Update-VMVersion
To upgrade the virtual machine configuration version by using Windows PowerShell, use the Update- VMVersion cmdlet.
Step 3: CheckPoint-VM
The Checkpoint-VM cmdlet creates a checkpoint of a virtual machine. Note: There is no Upgrade-VMVersion cmdlet

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest
You install Windows Server 2021 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: From Windows System Image Manager, you create an answer file, you copy the file to C:Sysprep on each virtual machine, and then you run the Apply-Image cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 5
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1. VM1 runs Windows Server 2021. VM1 uses a VHD for storage.
The disk configuration of VM1 is shown in the exhibit.

You need to increase the size of volume D to 400 GB.
Which cmdlets should you run on Server1 and VM1? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: This solution only shows the domain FSMO roles, not the forest FSMO roles. References:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmoroles/

NEW QUESTION 7
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation: Server 1 (IPAM): Access Policy
VMM must be granted permission to view and modify IP address space in IPAM, and to perform remote management of the IPAM server. VMM uses a “Run As” account to provide these permissions to the IPAM network service plugin. The “Run As” account must be configured with appropriate permission on the IPAM server.
To assign permissions to the VMM user account
In the IPAM server console, in the upper navigation pane, click ACCESS CONTROL, right-click Access Policies in the lower navigation pane, and then click Add AccessPolicy.
Etc.
Server 2 (VMM) #1: Network Service Server 2 (VMM) #2: Run As Account
Perform the following procedure using the System Center VMM console. To configure VMM (see step 1-3, step 6-7)

Etc. References:
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

NEW QUESTION 8
DRAG DROP
You have a network that contains several servers that run Windows Server 2021.
You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:
How should you configure the DSC recourses? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation: Box 1: WindowsFeature
The WindowsFeature resource in Windows PowerShell Desired State Configuration (DSC) provides a mechanism to ensure that roles and features are added or removed on atarget node.
Box 2: Present
The Ensure Property indicates if the role or feature is added. To ensure that the role or feature is
added, set this property to "Present" To ensure that the role or feature is removed, set the property to "Absent".
Example:
WindowsFeature RoleExample
{
Ensure = "Present"
# Alternatively, to ensure the role is uninstalled, set Ensure to "Absent" Name = "Web-Server"# Use the Name property from Get-WindowsFeature
}
Box 3: Service
The Service resource in Windows PowerShell Desired State Configuration (DSC) provides a mechanism to manage services on the target node.
Box 4: Running
The State property indicates the state, either Running or Stopped, you want to ensure for the service. References:
https://msdn.microsoft.com/en-us/powershell/dsc/windowsfeatureresource https://msdn.microsoft.com/en-us/powershell/dsc/serviceresource

NEW QUESTION 9
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.
The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.
A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.
You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network
Which cmdlet should you use?

• A. New-NetNeighbor
• B. New-NetRoute
• C. Set-NetTcpSetting
• D. Set-NetNeighbir

Answer: B

NEW QUESTION 10
HOTSPOT
You deploy a new Hyper-V host named Server1 that runs Windows Server 2021. You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDM A.
All of the equipment on your network supports 10-Gbps connectivity. On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows tog files for all of the servers on the network.
VM1 has four virtual processors. You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 11
You have a failover cluster named Cluster1.
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.
You need to configure monitoring on VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node.
Which tool should you use?

• A. Resource Monitor
• B. Failover Cluster Manager
• C. Server Manager
• D. Hyper-V Manager

Answer: B

Explanation: Do you have a large number of virtualized workloads in your cluster? Have you been looking for a solution that allows you to detect if any of the virtualized workloads in your cluster are behaving abnormally? Would you like the cluster service to take recovery actions when these workloads are in an unhealthy state? In Windows Server 2012/2021, there is a great new feature, in Failover Clustering called “VM Monitoring”, which does exactly that – it allows you monitor the health state of applications that are running within a virtual machine and then reports that to the host level so that it can take recovery actions.
VM Monitoring can be easily configured using the Failover Cluster Manager through the following steps:
References:
https://blogs.msdn.microsoft.com/clustering/2012/04/18/how-to-configure-vm-monitoring-inwindows- server-2012/

NEW QUESTION 12
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.

All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?

• A. On Server2, configure the VLAN ID setting of Switch1.
• B. On Server2, create an external switch and connect VM3 to the switch.
• C. Modify the subnet mask of VM1 and VM2.
• D. Configure network virtualization for VM1 and VM2.

Answer: D

NEW QUESTION 13
You have an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2021. You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

• A. From Routing and Remote Access, configure the authentication provider.
• B. From the Connection Manager Administration Kit, create a Connection Manager profile.
• C. From Server Manager, create an Access Policy.
• D. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Answer: A

NEW QUESTION 14
HOTSPOT
You have a Hyper-V host that runs Windows Server 2021. The Hyper-V host has a virtual machine named VM1.
You have a VHD named VHD1.vhdx that has a generalized image of Windows Server 2021. You plan to create multiple virtual machines that will use the generalized image.
You need to create differencing disks based on VHD1.vhdx.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/new-vhd https://blogs.technet.microsoft.com/canitpro/2013/05/28/step-by-step-creating-differencing-disks/

NEW QUESTION 15
HOT SPOT
Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.

The forest contains a server named Server2 that hosts the DFS namespace.
\Contoso.comNamespace1Folder2 has the following configuration.

\ContosoNamespace1Folder2 has the targets configured as shown in the following table.

For each of the following statement, Select Yes if Statement is true. Otherwise , select No.

Answer:

Explanation:

NEW QUESTION 16
You have a Hyper-V host named Server1 that runs Windows Server 2021.
Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon. On VM1, you have a container network that uses transparent mode.
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. What should you do?

• A. On VM1, run docker network connect.
• B. On Server1, run docker network connect.
• C. On VM1, run Get-VMNetworkAdapter –VMName VM1 | Set-VMNetworkAdapter – MacAddressSpoofing On.
• D. On Server1, run Get-VMNetworkAdapter –VMName VM1 | Set-VMNetworkAdapter – MacAddressSpoofing On.

Answer: D

Explanation: If the container host is virtualized, and you wish to use DHCP for IP assignment, you must enable MACAddressSpoofing.
PS C:> Get-VMNetworkAdapter -VMName ContainerHostVM | Set-VMNetworkAdapter - MacAddressSpoofing On
The command needs to be run on the Hyper-V host. References:
https://msdn.microsoft.com/enus/ virtualization/windowscontainers/management/container_networking

NEW QUESTION 17
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:
• Each virtual machine has one virtual network adapter.
• VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
• All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You create a new NLB cluster that contains VM3.
You need to ensure that VM2 can remain in the original cluster and be added to the new cluster. What should you do first?

• A. Add a new virtual network adapter to VM2.
• B. Install the Web Application Proxy server role on VM2 and VM3.
• C. Change the cluster operation mode.
• D. Modify the default port rul

Answer: A

Explanation: References:
http://myitforum.com/myitforumwp/2012/08/16/how-to-configure-an-nlb-in-hyper-v-part-1/

NEW QUESTION 18
HOT SPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. You enable Response Rate Limiting on Server1. You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which cmdlets should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: https://docs.microsoft.com/en-us/powershell/module/dnsserver/setdnsserverresponseratelimiting? view=win10-ps

NEW QUESTION 19
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: Invoke-IpamGpoProvisioning –Domain contoso.com –GpoPrefixName IPAM –IpamServerFqdn dc1.contoso.com