70-410 | 10 Tips For Improve 70-410 vce

Question No: 7

Your network contains an Active Directory domain named contoso.com.

An organizational unit (OU) named OU1 contains the user accounts and the computer accounts for laptops and desktop computers. A Group Policy object (GPO) named GP1 is linked to OU1. You need to ensure that the configuration settings in GP1 are applied only to the laptops in OU1. The solution must ensure that GP1 is applied automatically to new laptops that are added to OU1.

What should you do?

A. Modify the GPO Status of GP1.

B. Configure the WMI Filter of GP1.

C. Modify the security settings of GP1.

D. Modify the security settings of OU1.

Answer: B

Question No: 8

You run a Windows 2012 R2 Hyper-V Role Server, you need to shrink the size of files.vhd. Which PowerShell cmdlet option you should run first?

A. Dismount-VHD

B. Mount-VHD

C. Resize-VHD

D. Convert-VHD

Answer: D

Question No: 9

You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows Server 2012 R2 installed.

ABC.comu2021s user accounts are located in an organizational unit (OU), named ABCStaff. ABC.comu2021s managers belong to a group, named ABCManagers.

You have been instructed to create a new Group Policy object (GPO) that should be linked to the ABCStaffOU, but not affect ABC.comu2021s managers.

Which of the following actions should you take?

A. You should consider removing the user accounts of the managers from the ABCStaff OU.

B. You should consider configuring the new GPOu2021s WMI filter.

C. You should consider adding the user accounts of ABC.comu2021s managers to the Admins group.

D. You should consider adding the user accounts of ABC.comu2021s managers to the local Administrators group.

Answer: B

Question No: 10

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.

You are running a training exercise for junior administrators. You are currently discussing what happens when you run the Remove-NetLbfoTeam Windows PowerShell cmdlet.

Which of the following describes the results of running this cmdlet?

A. It removes one or more network adapters from a specified NIC team.

B. It removes a team interface from a NIC team.

C. It removes a specified NIC team from the host.

D. It removes a network adapter member from a switch team.

Answer: C

Explanation:

Remove-NetLbfoTeam removes the specified NIC team from the host.

The Remove-NetLbfoTeam cmdlet removes the specified NIC team from the host. This cmdlet disconnects all associated team members and providers from the team. You can specify the team to remove by using either a team object retrieved by Get-NetLbfoTeam, or by specifying a team name.

You can use Remove-NetLbfoTeam to remove all NIC teams from the server. You need administrator privileges to use Remove-NetLbfoTeam.

Question No: 11

You have a server named Server1. Server1 runs a Server Core installation of Windows Server 2012 R2. The local area connection on Server1 has the following configuration:

u2711 IP address: 10.1.1.1

u2711 Subnet mask: 255.255.240.0

u2711 Default gateway: 10.1.1.254

u2711 Preferred DNS server: <none>

The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1.

Which command should you run?

A. sconfig.cmd

B. net.exe

C. Set-NetIPInterface

D. netsh.exe

Answer: A

Explanation:

In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations.

Network settings

You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well.

Question No: 12

Your network contains a file server named Server1 that runs Windows Server 2012 R2. All

client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the companyu2021s desktop applications. A network technician shares Folder1 as Share 1.

You need to ensure that the share for Folder1 is not visible when users browse the network.

What should you do?

A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.

B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.

C. From the properties of Folder1, configure the hidden attribute.

D. From the properties of Share1, configure access-based enumeration

Answer: B

Question No: 13

You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed. You attach four 500-GB disks to Server1. You need to configure the storage to meet the following requirements:

u2711 Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years.

u2711 Storage for an application named Application2 must be provided. Application2

requires 20 GB and will require a maximum of 900 GB in three years.

u2711 The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications.

u2711 The storage must be available if a single disk fails.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From File and Storage Services, create virtual disks by using fixed provisioning.

B. From File and Storage Services, create a storage pool that uses all four disks.

C. From Disk Management, create two new mirror volumes that use two disks each.

D. From Disk Management, create a new RAID-5 volume that uses all four disks.

E. From File and Storage Services, create virtual disks by using thin provisioning.

Answer: B,E

Question No: 14

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 is a DHCP server that is configured to have a scope named Scope1. Server2 is configured to obtain an IP address automatically.

In Scope1, you create a reservation named Res_Server2 for Server2.

A technician replaces the network adapter on Server2.

You need to ensure that Server2 can obtain the same IP address. What should you modify on Server1?

A. The Name Protection settings of Scope1

B. The MAC address of Res_Server2

C. The Advanced settings of Res_Server2

D. The Network Access Protection Settings of Scope1

Answer: B

Explanation:

DHCP reservations are given based upon MAC address (at least on IPv4/DHCPv4).

For clients that require a constant IP address, you can either manually configure a static IP address, or assign a reservation on the DHCP server. Reservations are permanent lease assignments that are used to ensure that a specified client on a subnet can always use the same IP address. You can use DHCP reservations for hosts that require a consistent IP address, but do not need to be statically configured. DHCP reservations provide a mechanism by which IP addresses may be permanently assigned to a specific client based on the MAC address of that client. The MAC address of a Windows client can be found running the ipconfig /all command.

For Linux systems the corresponding command is ifconfig -a. Once the MAC address has been identified, the reservation may be configured using either the DHCP console or at the command prompt using the netsh tool.

Media access control (MAC) address authorization functions in the same way as automatic number identification (ANI) authorization, but it is used for wireless clients and clients connecting to your network by using an 802.1X authenticating switch. Since the network adapter was replaced, you need to modify the MAC address on Server1 to ensure that Server2 can obtain the same IP address.

Reference: http://technet.microsoft.com/en-us/library/dd197535%28v=WS.10%29.aspx

Question No: 15

Your network contains an Active Directory domain named contoso.com. All user accounts in the sales department reside in an organizational unit (OU) named OU1.

You have a Group Policy object (GPO) named GPO1. GPO1 is used to deploy a logon script to all of the users in the sales department.

You discover that the logon script does not run when the sales users log on to their computers. You open Group Policy Management as shown in the exhibit.

You need to ensure that the logon script in GPO1 is applied to the sales users. What should you do?

A. Enforce GPO1.

B. Modify the link order of GPO1.

C. Modify the Delegation settings of GPO1.

D. Enable the link of GPO1.

Answer: D

Question No: 16

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a server named Server1.

You install the Windows PowerShell Web Access gateway on Server1.

You need to provide administrators with the ability to manage the servers in the domain by using the Windows PowerShell Web Access gateway.

Which two cmdlets should you run on Server1? (Each correct answer presents part of the solution. Choose two.)

A. Set-WSManQuickConfig

B. Set-WSManInstance

C. Add-PswaAuthorizationRule

D. Set-BCAuthentication

E. Install-PswaWebApplication

Answer: C,E

Explanation:

:A. Configures the local computer for remote management.

:B. Modifies the management information that is related to a resource.

:C. Adds a new authorization rule to the Windows PowerShell Web Access authorization rule set.

:D. Specifies the BranchCache computer authentication mode.

:E. Configures the Windows PowerShell u00ae Web Access web Application in IIS.