2V0-01.19 | VMware 2V0-01.19 Preparation Labs 2021

NEW QUESTION 1
A VMware vSphere 6.x administrator is implementing a new eight-node cluster for business critical applications. Each server will be configured with two 10 GbE network adapters and will utilize iSCSI for storage on one subnet.
Which feature is required to implement this solution?

• A. Storage DRS
• B. Network I/O Control
• C. VMKernel Port Binding
• D. LACP

Answer: C

NEW QUESTION 2
Which two options does VM Monitoring use to determine if a virtual machine should be reset? (Choose two.)

• A. I/O activity from the virtual machine
• B. CPU activity from the virtual machine
• C. Network activity from the virtual machine
• D. Heartbeats from VMware Tools

Answer: AD

NEW QUESTION 3
Which two statements are correct when licensing an ESXi 6.x host? (Choose two.)

• A. ESXi licenses can only be applied to ESXi hosts connected to a vCenter Server.
• B. Bulk licensing requires vSphere Auto Deploy to be enabled.
• C. ESXi licenses can be assigned utilizing the ESXi host client.
• D. Bulk licensing requires vSphere PowerCLI.

Answer: CD

NEW QUESTION 4
Which are two steps that a vSphere administrator must take to increase the capacity of an existing VMFS datastore that is participating in a Storage DRS cluster? (Choose two.)

• A. In the vSphere Web Client navigator, select Global Inventory Lists > Datastore Clusters.
• B. Select the target datastore to grow and click the Increase Datastore Capacity icon.
• C. Select the target datastore cluster and click the Add Datastore icon.
• D. In the vSphere Web Client navigator, select Global Inventory Lists > Datastores.

Answer: BD

NEW QUESTION 5
Which three IP addresses may be pinged by the Test Management Network feature in the ESXi hosts DCUI? (Choose three.)

• A. Primary DNS server
• B. NTP server
• C. Secondary DNS server
• D. DHCP server
• E. Default gateway

Answer: ACE

NEW QUESTION 6
A vSphere administrator is tasked with implementing a production VMware vSAN cluster and has followed the design and sizing guide to correctly size the environment.
Which two requirements represent valid VMware recommendations? (Choose two.)

• A. A disk group must be composed of more than one cache disk and at least one capacity disk.
• B. All-Flash configurations do not require a caching tier.
• C. A disk group must be composed of one cache disk and at least one capacity disk.
• D. The cache tier should be sized to no less than 10% of the capacity tier.

Answer: CD

NEW QUESTION 7
When using vSAN, all the storage characteristics are specified by Storage Policies.
Which parameter in vSAN Storage Policies can increase performance in a cache miss situation?

• A. Number of failures to tolerate
• B. Number of disk stripes per object
• C. Force provisioning
• D. Object space reservation (%)

Answer: B

NEW QUESTION 8
What load balancing appliance does VMware recommended for deploying a vRealize Log Insight cluster?

• A. F5 Big-IP
• B. Citrix NetScaler
• C. VMware NSX Load Balancer
• D. Integrated Load Balancer

Answer: D

NEW QUESTION 9
Which two statements are true about LACP support with the vSphere Distributed Switch? (Choose two.)

• A. LACP works with MAC hash load balancing.
• B. LACP works with software iSCSI multipathing.
• C. LACP does not work with host profiles.
• D. LACP does not work with port mirroring.

Answer: CD

NEW QUESTION 10
Which three features can be configured during the initial creation of a cluster? (Choose three.)

• A. vSAN
• B. EVC
• C. DRS
• D. Proactive HA

Answer: ABC

NEW QUESTION 11
What are two prerequisites for adding RDM disks to a VM? (Choose two.)

• A. LUN used as a RDM must be visible to the underlying hosts in the cluster.
• B. LUN used as a RDM cannot be visible to any other underlying hosts in the cluster.
• C. VM resides on a VMFS datastore.
• D. LUN used as a RDM must be hidden to the ESXi host.

Answer: AC

NEW QUESTION 12
What are two uses of the vRealize Log Insight Agents for Windows and Linux? (Choose two.)

• A. Collect events from flat text files.
• B. Monitor the state of syslog/eventmgr services.
• C. Control the state of the syslog/eventmgr services.
• D. Monitor directories with the filesystem.

Answer: AD

NEW QUESTION 13
Which two options are available when migrating a powered off VM and relocating the attached disks? (Choose two.)

• A. Raw Device Mapping Virtual compatibility
• B. Same format as source
• C. Thick Provision Eager Zeroed
• D. Raw Device Mapping Physical compatibility

Answer: BC

NEW QUESTION 14
A vSphere administrator uses vMotion to migrate a virtual machine between two ESXi hosts and notices that they can no longer ping the VM.
What is the cause?

• A. The destination host has an incorrect VLAN tag on the virtual machine port group for the VM.
• B. The destination host has two port groups with the same VLAN tag.
• C. There is an MTU mismatch.
• D. The virtual machine has RDMs attached.

Answer: B

NEW QUESTION 15
What are two valid methods to deploy an OVF template which consists of two or more VMs? (Choose two.)

• A. Deploy on the VMware vSphere Hypervisor.
• B. Deploy on a vSphere DRS enabled cluster.
• C. Deploy on a vSphere HA enabled cluster.
• D. Deploy on the standalone host connected to vCenter Server.

Answer: AB

NEW QUESTION 16
Which two scenarios can cause a VM to appear orphaned in the vSphere Web Client? (Choose two.)

• A. The VM was removed from the vCenter Server.
• B. The VM had an unsuccessful migration within a vSphere DRS cluster.
• C. The ESXi host had an unsuccessful failover event in vSphere HA.
• D. The VM was unregistered from the ESXi host directly.

Answer: CD

NEW QUESTION 17
A vSphere administrator has been tasked with ensuring that 500 virtual desktops are unable to communicate with one another, but can communicate with required services.
Which two solutions does VMware recommend? (Choose two.)

• A. vSphere Host Firewall
• B. Private VLAN
• C. VMware NSX Distributed Firewall
• D. Port Filtering

Answer: BC

NEW QUESTION 18
Which function key command will allow a vSphere administrator to access ESXi shell?

• A. Alt + F12
• B. Alt + F1
• C. Alt + F2
• D. Alt + F11

Answer: B

NEW QUESTION 19
Which three steps deploy a virtual machine from a VM Template in the Content Library? (Choose three.)

• A. Right-click a VM Template and select New VM from This Template.
• B. In the vSphere Web Client navigator, select vCenter Inventory Lists > VM Templates in Folders.
• C. Using vSphere Host client, select vCenter Inventory Lists > Content Libraries.
• D. In the vSphere Web Client navigator, select vCenter Inventory Lists > Content Libraries.
• E. Select a Content Library, click Related Objects tab and click Templates.

Answer: ACD

NEW QUESTION 20
Which two network failure detection options are available when using a vSphere Standard Switch? (Choose two.)

• A. Fixed with preferred path
• B. Dynamic
• C. Link status with Beacon probing
• D. Link status only

Answer: CD

NEW QUESTION 21
A vSphere administrator is required to apply security hardening policies following the VMware vSphere Hardening Guide recommendations.
Which tool enables native compliance reporting for these guidelines?

• A. VMware vCenter Server
• B. VMware vRealize Operations Manager
• C. VMware vSphere Update Manager
• D. VMware AirWatch

Answer: B

NEW QUESTION 22
Which two components are built into the vCenter Server Appliance 6.x? (Choose two.)

• A. vSphere Auto Deploy
• B. vCenter Converter
• C. vRealize Orchestrator
• D. VMware vSphere Update Manager

Answer: AD

NEW QUESTION 23
A vSphere administrator takes a snapshot before logging into a VM to preserve the current state in case of a problem.
Assuming this process is repeated every day for over 30 days, what two results will happen? (Choose two.)

• A. The virtual machine’s performance will decrease.
• B. The virtual machine can end up consuming more space on the datastore than assigned.
• C. The administrator will have backups for the entire month.
• D. The administrator has successfully cloned the VM 30 times.

Answer: AB

NEW QUESTION 24
What are the two minimum configurations of a disk group in a vSAN host?

• A. 1 SSD drive for the caching tier and 1 or more SSDs for the capacity tier
• B. 1 SSD drive for the caching tier and 1 or more HDDs for the capacity tier
• C. 2 or more SSD drives for the caching tier and 2 or more HDDs for the capacity tier
• D. 2 or more SSD drives for the caching tier and 2 or more SSDs for the capacity tier

Answer: A

NEW QUESTION 25
What three configuration steps are required to mount an NFS datastore in vSphere? (Choose three.)

• A. On virtual machines running Microsoft Windows, increase the value of the SCSI TimeoutValue parameter to allow Windows to better tolerate delayed I/O resulting from path failover.
• B. Configure VMkernel Port Binding.
• C. On each ESXi host, configure a VMkernel Network port for NFS traffic.
• D. On the NFS server, configure an NFS volume and export it to be mounted on the ESXi hosts.
• E. If you plan to use Kerberos authentication with the NFS 4.1 datastore, configure the ESXi hosts for Kerberos authentication.

Answer: CDE

NEW QUESTION 26
......